Monday, December 4, 2017
IN THIS ISSUE:
Achieving & Maintaining the Best Sound From Your Concert Snare Drum
Training students to understand the difference between striking a high-tension marching drum and a concert drum is another crucial step.Heads
Regular replacement of both top (batter) and bottom (snare side) drumheads is the first step to improving the sound of your concert snare drum. A new set of heads each year is generally ideal. Keep an extra set on hand in case one becomes damaged. For the steps involved in replacing a drumhead, view the Percussion 101 video series produced by the Vic Firth Company online at vicfirth.com/percussion-101-concert-snare. Only heads designed specifically for concert batter or snare side applications are to be used.Head Tension
Another critical step is to properly adjust the head tension. When the batter head is too loose, the rebound of the stick lacks sufficient energy and feels spongy to the performer. By raising the pitch of the drum to approximately concert A, the sticks will have a healthy amount of rebound. The snare side head will need the same amount of tension or greater than the batter head. Over time, heads will loosen slightly and require periodic retuning. Tighten in only small amounts. Keep tension rods greased adequately.Snare Tension
Good heads with the correct head tension is a great start. Now is the time to set the snare tension. Begin by ensuring the snares sit smoothly against the bottom head when engaged. If needed, adjust the snare cord to realign. Using the adjustment knob, loosen the snares, then slowly add tension while striking the center of the head at a soft dynamic. Once a crisp sound is achieved, move toward the rim and continue as needed. Expect longer snare response and ring when checking the edge sound. It may be helpful to upgrade your snares. Options include wire coil, steel cable, coated cable, or combinations of these and others.Head Muffling
The decay in sound when striking a properly tuned snare drum may necessitate a slight degree of muffling based on the acoustics in the rehearsal/performance space. If too much muffling is applied--whereby all ring has been eliminated--then a choked sound will be the result. Instead, strive for a slight amount of ring, which is part of what contributes to a concert snare drum's characteristic sound. Options for muffling include products like MoonGel Damper Pads by RTOM or a folded handkerchief.Open Fulcrum/Beating Spot/Rolls/Balance
Training students to understand the difference between striking a high-tension marching drum and a concert drum is another crucial step. Remind students to maintain an open fulcrum with a relaxed hand. Harness the maximum amount of energy from the drumhead to produce the most resonant sound. Utilize the center of the head for dynamic levels at or above mezzo forte. Move to the edge for dynamic levels at or below mezzo piano. Insist that students strike with beads as close together as possible. Rolls and ruffs are closed (buzzed) in almost all cases. Ask students to balance the sound of the snare with other instruments in the section and with the entire ensemble.Storage
Secure adequate storage for the drum along with a protective case for transport to minimize the risk of accidentally damaging a head or any other part of the instrument.
Get your trumpets ready for Sleigh Ride!
Click the picture for an awesome "horse-whinny" tutorial by John Evans from Webb City, MO.
From the Bandroom - Meadow Valley Grade School
Contact Your Local Palen Music Center Representative
Can we assist you with anything? Please contact your local Palen Music Center school road representative for all of your music education needs.
If you would like to submit material, make corrections, give comments, or wish to be removed from this mailing list, please contact David Gorham.